The Automist Tap Head has been designed to be compatible with the vast majority of monobloc taps (45-60 mm diameter base) that fit into a standard 35 mm sink or work surface hole. Monobloc taps are affixed to the worktop using a stud bar, which may be at the front or rear of the tap dependent on the tap model: a) Front stud configuration (Automist with 2 nozzles, front-facing stud) b) Rear stud configuration (Automist with 2 nozzles, back facing stud) Automist is compatible with either configuration. Monobloc taps which have two studs, instead of one, at either the front or the back can also be used with either configuration.
Comments
0 comments
Please sign in to leave a comment.